OBJECTIVE The objective of this project is a build a voltmeter that can measure voltages between 0 and 30V. I will use the analog inputs of an Arduino to measure the voltage, via a voltage divider. When an Arduino is powered from a 5V supply the maximum voltage that could be measured is 5V. However,…
THE OBJECTIVE Our objective is to build a frequency counter that can identify frequencies up to 1MHz. pulseIn() pulseIn() reads a pulse on a pin and waits for a change from HIGH to LOW or LOW to HIGH. This works with times that are between 10μs and 180s. You can provide either two or three…
OBJECTIVE A range finder is a device that is used to find the distance between two points, using a technique known as ranging. In this project we will design and build a range finder that can measure how far away an object is, from 2 cm to 4 m (0.79 in to 13.12 ft). The…